1～9 item / All 9 items
It measures coating thickness non-destructively and without contact!
The measurement principle is similar to thermal reflection, where light is irradiated onto the object, and the time it takes for heat to propagate is converted into coating thickness. Measurements can be made regardless of specific materials or substances, and it is possible to measure both powders and liquids.
Immediately after painting, measuring the thickness of the uncured film reduces the number of defects! Improve work efficiency by reapplying without waiting for curing!
◆ Non-contact measurement allows for film thickness measurement in an uncured state ◇ Compatible with a wide variety of substrates without selection ◆ Portable to the job site due to rechargeable battery ◇ Film thickness can be checked immediately after application ■ Main Applications ■ Measure before curing powder coatings! It allows for a rough prediction of the film thickness after curing, reducing the hassle of reapplication due to insufficient thickness! Non-contact, non-destructive, handheld, and flexible measurement distance and angle accommodate various workpiece shapes!
Fastening for innovative EPS (bead foam polystyrene) insulation boards for various base materials.
◆Applicable Base Materials - European Technical Certification Base Material Classification (Normal Concrete, Solid Brick, Perforated Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Perforated Brick - Perforated Limestone Brick - ALC - Lightweight Concrete - Sepa Parpaing (French-made Brick), etc. ◆Function and Usage - Embedded into the insulation material through the perforated holes, using a setting tool to screw in. - The spiral disk and screw rotate simultaneously through the insulation material with the same pitch, locking in a co-rotating manner against the base material. - Subsequently, the steel screw enters the expansion zone, compressing the compression zone up to a few millimeters thick, securing to the base material. - The setting is complete when the top surface of the insulation material and the bottom surface of the marking ring are flush.
